download To reduce front spindle bushing noise which may be experienced during
severe cold ambient temperatures, a new needle roller bearing and thrust
bushing have been made available for use in place of the original
bushing. Note: This repair is applicable only to 4X4 vehicles produced
after 8/89. INSTALLATION PROCEDURE: 1. Remove front axle bushings (refer
to applicable service manual section). 2. Install needle roller bearing
using SST #09620-30010, tool #5 or equivalent bearing driver.
Reference: Bearing must be installed with flat side (I.D. number and
part number) facing outward. Refer to illustration.
Comments for "4X4 – TRUCK, 4RUNNER 4X4 FRONT AXLE BEARING REPLACEMENT"
Post a Comment