Disassembly 1. WARNING: To reduce the risk of serious personal injury,
read and follow all warnings, notes and instructions in the steering
column removal and installation procedure. Remove the steering column.
For additional information, refer to Steering Column in this section.
2. Remove the clockspring. For additional information, refer to Section
501-20B. 3. Remove the multifunction switch. 4. Unclip the steering
column opening gearshift lever seal from the steering column.
5. Remove the gearshift lever retaining pin and remove the gearshift
lever assembly. 6. CAUTION: Carefully note the position of the
steering column lock gear, bearing and retainer prior to removal.
Remove the snap ring. 7. Remove the steering column lock housing
bearing. 8. Remove the steering column lock gear. 9. On a fixed
steering column, remove the snap ring from the bottom of the steering
column shaft. 10. On a tilt steering column, remove the sensor ring. 1
Remove the steering column lower bearing spring. 2 Remove the sensor
ring. 11. Remove the steering column bearing tolerance ring from the
steering column shaft. 12. Remove the two lock cylinder housing pivot
screws.
Comments for "2003 Ford Taurus/ Sable How to Disassembly And Assembly Steering Column Column Shift"
Post a Comment