ISSUE Some 2000-2007 Focus vehicles may exhibit an excessive engine
vibration at idle, most noticeable when the transmission is engaged in
reverse. This condition may be caused by small stones, road debris, ice
or snow packed/lodged in the rear engine roll restrictor. ACTION
Inspect the rear engine roll restrictor for debris and install service
shield if necessary. SERVICE PROCEDURE 1. Inspect the rear engine
roll restrictor for debris. 2. Remove any debris from rear engine roll
restrictor. 3. Remove the cross member-to-roll restrictor attachment
bolt. 4. Install service shield (Figure 1). 5. Reinstall roll
restrictor attachment bolt and torque to 35 lb-ft (47 N•m).
Comments for "2000 - 2007 Ford Focus Engine Vibration At Idle"
Post a Comment