download Care must be taken when installing this accessory to ensure damage does
not occur to the vehicle. The installation of this accessory should
follow approved guidelines to ensure a quality installation. These
guidelines can be found in the “Accessory Installation Practices”
document. This document covers such items as: • Vehicle Protection (use
of covers and blankets, cleaning chemicals, etc.). • Safety (eye
protection, rechecking torque procedure, etc.). • Vehicle
Disassembly/Reassembly (panel removal, part storage, etc.). • Electrical
Component Disassembly/Reassembly (battery disconnection, connector
removal, etc.). Please see your Toyota dealer for a copy of this
document. 1. Vehicle Protection. (a) Place driver seat in mid position.
(b) Set emergency brake. (c) Remove the negative battery cable. (Fig.
1-1) (1) Protect the fender before starting. CAUTION: Do not touch the
positive terminal with any tool when removing cable. (d) Using
protective blankets cover front seats, interior of vehicle and center
console and front side of the shift lever. (e) Wait 90 seconds before
proceeding to disassemble vehicle. 2. Disassembly of Vehicle. NOTE:
Place all removed parts on a protected surface. NOTE: When
disconnecting wiring connectors, do not pull on the wiring; pull on the
connector only. (a) Remove air conditioning control assembly (L,R).
(Fig. 2-1) (1) Apply protective tape. (2) Using a panel remover,
disengage the four (4) clips and remove the air conditioning control
assembly
Comments for "TOYOTA TACOMA 2008 INTERFACE KIT FOR IPOD REPAIR"
Post a Comment