Firmly hold the outer end of the wheel film to pull it off. NOTE: If
film adhesive residue is found on the disc wheel, remove it with a soft
cloth dipped in ethyl alcohol (ethanol). Do not use thinner to remove
the adhesive residue. When the wheel film is removed below an ambient
temperature of 0C (32F), it is possible that the film may tear. For ease
of film removal in cold conditions, please warm the film above 0C (32F)
using one of the following methods: -Splash (hot) water on the wheel
film. -Warm wheel film with cotton cloth soaked in hot water. -Warm
wheel film with heat gun. Be sure not to overheat the film and wheel.
-Warm wheel film by infrared heater (lamp) for paint. Be sure not to
overheat the film and wheel. -Warm wheel film by steam car wash. -Park
vehicle indoors (e.g. garage, etc.) for an extended period of time
Comments for "TOYOTA All Models with Wheel Film WHEEL FILM FOR BRAKE ROTOR RUST PREVENTION"
Post a Comment