download facing forward. NOTE: The cross bars will create wind noise at highway
speeds if they are installed backwards. 3. Align the ends of the front
and rear cross bars with the paint marks on the roof rack as
illustrated. Then securely tighten the knobs. NOTE: Installation
positions of cross bars shown above are most effective to reduce wind
noise. 4. Install the right and left rear roof rack leg covers. A.
Insert the protrusion at the front of the cover into the roof rack rail.
B. Place the cover on the leg, aligning each rear end. At this time, do
NOT press the cover down. C. Engage the cover claws located towards the
outside of the vehicle. D. Engage the cover claws located towards the
inside of the vehicle. NOTE: If the inside and outside cover claws are
pressed down at the same time, the cover claws may be damaged. E. Check
that the cover is installed securel
Comments for "2007 4Runner Roof Rack Cross Bar Installation And Repair"
Post a Comment