Care must be taken when installing this accessory to ensure damage does
not occur to the vehicle. The installation of this accessory should
follow approved guidelines to ensure a quality installation. These
guidelines can be found in the “Accessory Installation Practices”
document. This document covers such items as:- — Vehicle Protection (use
of covers and blankets, cleaning chemicals, etc.). — Safety (eye
protection, rechecking torque procedure, etc.). — Vehicle
Disassembly/Reassembly (panel removal, part storage, etc.). — Electrical
Component Disassembly/Reassembly (battery disconnection, connector
removal, etc.). Please see your Toyota dealer for a copy of this
document. 1. Bracket Installation (a) Remove end caps from the back of
each vehicle bed side rail. (Fig. 1-1) (b) Slide one clamp plate into
each side rail. (Fig. 1-2) (c) Install the LH Bracket (with the WARNING
label) onto the LH clamp plate threaded stud
Comments for " 2005 - 2010 Toyota Tacoma Cargo Divider Preparation and Bracket Installation"
Post a Comment