Ensure that the A/C system high & low side refrigerant pressures are
normal before Procedure proceeding with the following repair procedure.
NOTE: For abnormal system pressures, use the diagnostic procedure given
in the Repair Manual to determine the problem. 1. Remove the A/C
Compressor. 2. Replace the Alternator Adjusting Bar with the new part
number. 3. Replace the Magnetic Clutch Rotor with the new part number.
4. Adjust the clearance between the pressure plate and rotor from 0.35
to 0.60 mm (from 0.014 to 0.024 inch). NOTE: Use shims to adjust the
clearance according to Repair Manual. 5. Install the A/C Compressor. 6.
Adjust the drive belt tension to 121 ft. lbs. otherwise the condition
may persist
Comments for "1994 – 1996 Camry L4 A/C Compressor Knocking Noise Repair"
Post a Comment